Introducing the AHA  Low Cost Vertical Home Lifts. A step above the rest. AHA's Vertical Home Lift was designed and engineered for home use. It's easy to operate easy to install and virtually maintenance free. Every safety detail has been carefully designed into the PL-45 and PL-72, including a non-slip platform, constant pressure switches, a low platform for easy roll-on/roll-off, safety barrier and railing, and rolled edges.  The PL-45 and PL-72 are sturdy enough to lift and lower up to 500 pounds and will accommodate electric wheelchairs and scooters. Running on a gear box and chain, the PL-45 and PL-72 provide a smooth and quiet up and down ride, requiring little maintenance. All mechanics are fully enclosed, yet easy to access through the rear or front of the housing unit. The lifts are completely weatherized and attractively finished in off-white.  Shipped fully assembled, the PL-45 and PL-72 install in 6 easy steps. The AHA Vertical Home Lifts are the economical and practical answer to stair barries.

CLICK HERE FOR DETAIL

CLICK HERE FOR STAIR LIFTS

AHA'S NEW HANDILIFTS - FOR INDOOR AND OUTDOOR USE.

	The AHA HANDILIFT-S is a vertical wheelchair platform lift designed to provide an economical means of vertical access for persons with physical disabilities. Simple design and ease of installation makes  HANDILIFT-S the most economical solution to accessibility problems in the home or in a public building. Powered by a one horsepower motor, the reliable Acme Screw drive system can lift 750 lbs. (340 kg). The HANDILIFT-S is available in two standard platform sizes, both with 42 1/4" high barrier side walls. Safety features include under-platform obstruction sensors, constant pressure control buttons, handrail, emergency stop button, final limit switch, and anti-slip flooring. The Handilift-S can be installed indoors or outdoors and will look new for years due to its electrostatically applied baked polyester gloss powder coat paint.
	The AHA-EN is a vertical wheelchair platform lift designed to provide an economical means of vertical access for persons with physical disabilities. The HANDILIFT-EN has a fully enclosed runway aluminum enclosure with your choice of either steel, clear, or tinted plexiglass panels. Each enclosure is tailored to the exact vertical dimensions of your application and can include a dome or sloped roof. Powered by a one horsepower motor, the reliable Acme Screw drive system can lift 750 lbs. (340 kg).   Safety features include electro-mechanical interlocks (to prevent movement if the gate or door is not closed and locked), constant pressure control buttons, handrail, emergency stop and alarm button, final limit switch, and anti-slip flooring. The Handilift-EN can be installed indoors or outdoors and will look new for years due to its electrostatically applied baked-on polyester gloss powder coat paint.
	The AHA HANDILIFT-SE is a vertical wheelchair platform lift designed to provide an economical means of vertical access for persons with physical disabilities. Simple design and ease of installation make the HANDILIFT-SE the most economical solution to accessibility problems in the home or in a public building. Powered by a one horsepower motor, the reliable Acme Screw drive system can lift 750 lbs. (340 kg) capacity at a rate of 8 feet per minute. The HANDILIFT-SE is a semi-enclosed lift with aluminum side walls, a lower aluminum landing gate and an  upper aluminum landing gate, as well as a platform gate. The lower landing gate and side walls prevent access to the underside of the platform while the lift is in the raised position. Safety features include electro-mechanical interlocks (to prevent movement if the gates are not closed and locked), constant pressure control buttons, handrail, emergency stop button, alarm switch, final limit switch, and anti-slip flooring. The Handilift-SE can be installed indoors or outdoors and will look new for years due to its electrostatically applied baked-on polyester gloss powder coat paint.
	Stairlifts - Liberty RES The STAIR LIFT is a chair style lift designed to provide a safe and comfortable means of access along straight, curved, or spiral stairways. It is designed for persons who experience physical difficulty when climbing or descending a set of stairs. The Liberty Stair Lift is powered by a reliable rack and pinion drive system that will provide years of continuous, trouble-free operation. Installation on an existing straight, curved, or spiral staircase is easy and requires no structural stairway modifications. The passenger sits sideways while traveling on the Liberty Stair Lift, giving them the secure feeling of being able to see both up and down the staircase. The fold-down chair arms, footrest, and seatbelt further add to the passenger's safety. When not in use, the Liberty-REs Stair Lift "folds up" neatly against the wall, protruding only 14" (356 mm) from the wall.
	Stairlifts - Liberty LX The LIBERTY LX STAIR LIFT is a chair-style lift designed to provide a safe and comfortable means of access along a straight, curved, or spiral stairway. It is designed for persons who experience physical difficulty climbing or descending a set of stairs. The Liberty Stair Lift is powered by a reliable rack and pinion drive system that will provide years of continuous, trouble-free operation. Installation on an existing straight, curved, or spiral staircase is easy and requires no structural stairway modifications. While travelling on the Liberty Stair Lift, the passenger is siting sideways, giving them the secure feeling of being able to see both up and down the staircase. The wraparound design of the chair arms, footrest, and the retractable seatbelt further add to the passenger's safety. When not in use, the Liberty LX Stair Lift "folds up" neatly against the wall, protruding only 14" (356 mm).
Call 1-708-344-9021 for a free quotation and shipping estimate. OR E-MAIL US