Introducing the AHA
Low Cost Vertical Home Lifts.
A step above the rest.
AHA's Vertical Home Lift was designed and engineered for home use. It's
easy to operate easy to install and virtually maintenance free. Every safety
detail has been carefully designed into the PL-45 and PL-72, including
a non-slip platform, constant pressure switches, a low platform for easy
roll-on/roll-off, safety barrier and railing, and rolled edges.
The PL-45 and PL-72 are sturdy enough to lift and lower up to 500 pounds
and will accommodate electric wheelchairs and scooters. Running on a gear
box and chain, the PL-45 and PL-72 provide a smooth and quiet up and down
ride, requiring little maintenance. All mechanics are fully enclosed, yet
easy to access through the rear or front of the housing unit. The lifts
are completely weatherized and attractively finished in off-white.
Shipped fully assembled, the PL-45 and PL-72 install in 6 easy steps.
The AHA Vertical Home Lifts are the economical and practical answer to
stair barries.
   |
CLICK
HERE FOR DETAIL |
CLICK HERE FOR
STAIR LIFTS
|
The Vertical Home Lift PL-45 and PL-72
have a one year warranty on parts against defects Powered with a 110 volt
AC current, by a ½ HP motor The toggle control switches with a tamperproof
key lock switch are on a low voltage system, for safe operation Power drive
system is all weather(-30 - l20 degrees) Heavy duty worm drive gear box
with heavy duty #50 lifting chain 36 inch high side guard rail Hand crank
for manual operation Adjustable limit switches Automatic access ramp and
roll stop Non slip platform Capacity - 500 pounds Standard lifting height
45 inches, 72 inches option
OPTIONS
-
Call-send switches
-
Remote control call/send
-
90 degree turning platform
-
9 Bolt on platform
-
Battery power
-
Landing gate/platform gate
-
Additional height to 72 inches
-
Solid sides
-
Safety pan
-
Canopy top
-
ANSI model available
The AHA's Residential Lifts are one tough, safe, affordable lift. Compare
it against the competition. You'll save as much as 30% and more. The AHA's
Lift is fully warranted for one year.
|
AHA'S NEW HANDILIFTS - FOR INDOOR AND OUTDOOR USE.
CLICK HERE FOR
STAIR LIFTS
 |
The AHA HANDILIFT-S is a vertical wheelchair
platform lift designed to provide an economical means of vertical access
for persons with physical disabilities. Simple design and ease of installation
makes HANDILIFT-S the most economical solution to accessibility problems
in the home or in a public building. Powered by a one horsepower motor,
the reliable Acme Screw drive system can lift 750 lbs. (340 kg). The HANDILIFT-S
is available in two standard platform sizes, both with 42 1/4" high barrier
side walls. Safety features include under-platform obstruction sensors,
constant pressure control buttons, handrail, emergency stop button, final
limit switch, and anti-slip flooring. The Handilift-S can be installed
indoors or outdoors and will look new for years due to its electrostatically
applied baked polyester gloss powder coat paint. |
 |
The AHA-EN is a vertical wheelchair platform lift designed
to provide an economical means of vertical access for persons with physical
disabilities. The HANDILIFT-EN has a fully enclosed runway aluminum enclosure
with your choice of either steel, clear, or tinted plexiglass panels. Each
enclosure is tailored to the exact vertical dimensions of your application
and can include a dome or sloped roof. Powered by a one horsepower motor,
the reliable Acme Screw drive system can lift 750 lbs. (340 kg).
Safety features include electro-mechanical interlocks (to prevent movement
if the gate or door is not closed and locked), constant pressure control
buttons, handrail, emergency stop and alarm button, final limit switch,
and anti-slip flooring. The Handilift-EN can be installed indoors or outdoors
and will look new for years due to its electrostatically applied baked-on
polyester gloss powder coat paint. |
 |
The AHA HANDILIFT-SE is a vertical
wheelchair platform lift designed to provide an economical means of vertical
access for persons with physical disabilities. Simple design and ease of
installation make the HANDILIFT-SE the most economical solution to accessibility
problems in the home or in a public building. Powered by a one horsepower
motor, the reliable Acme Screw drive system can lift 750 lbs. (340 kg)
capacity at a rate of 8 feet per minute. The HANDILIFT-SE is a semi-enclosed
lift with aluminum side walls, a lower aluminum landing gate and an
upper aluminum landing gate, as well as a platform gate. The lower landing
gate and side walls prevent access to the underside of the platform while
the lift is in the raised position. Safety features include electro-mechanical
interlocks (to prevent movement if the gates are not closed and locked),
constant pressure control buttons, handrail, emergency stop button, alarm
switch, final limit switch, and anti-slip flooring. The Handilift-SE can
be installed indoors or outdoors and will look new for years due to its
electrostatically applied baked-on polyester gloss powder coat paint. |
 |
Stairlifts - Liberty RES
The STAIR LIFT is a chair style lift designed to provide a safe and
comfortable means of access along straight, curved, or spiral stairways.
It is
designed for persons who experience physical difficulty when climbing
or descending a
set of stairs.
The Liberty Stair Lift is powered by a reliable rack and pinion drive
system that will
provide years of continuous, trouble-free operation. Installation
on an existing
straight, curved, or spiral staircase is easy and requires no structural
stairway
modifications.
The passenger sits sideways while traveling on the Liberty Stair
Lift, giving them the
secure feeling of being able to see both up and down the staircase.
The fold-down chair arms, footrest, and seatbelt further add to the
passenger's
safety. When not in use, the Liberty-REs Stair Lift "folds up" neatly
against the wall,
protruding only 14" (356 mm) from the wall. |
 |
Stairlifts - Liberty LX
The LIBERTY LX STAIR LIFT is a chair-style lift designed to provide
a safe
and comfortable means of access along a straight, curved, or spiral
stairway. It is
designed for persons who experience physical difficulty climbing
or descending a set of
stairs.
The Liberty Stair Lift is powered by a reliable rack and pinion drive
system that will
provide years of continuous, trouble-free operation. Installation
on an existing
straight, curved, or spiral staircase is easy and requires no structural
stairway
modifications.
While travelling on the Liberty Stair Lift, the passenger is siting
sideways, giving them
the secure feeling of being able to see both up and down the staircase.
The
wraparound design of the chair arms, footrest, and the retractable
seatbelt further
add to the passenger's safety.
When not in use, the Liberty LX Stair Lift "folds up" neatly against
the wall, protruding
only 14" (356 mm). |
Call 1-847-803-1106 for a free
quotation and shipping estimate.
OR E-MAIL US
CLICK HERE FOR
STAIR LIFTS
|
| |
 |
|